3M Wrap Film Series 2080 in Satin colors comes with a Protective Film Layer, which can be removed quickly, easily and cleanly after install, reducing surface impressions and scratches for a beautiful finish. Greatly reduces the surface impressions* in a finished goods roll. It remains on during installation, then is removed easily and cleanly after installation.
2080 3M 2080 3M 2080 Satin Wrap Film Highly conformable and great cold stretch, better than 3M Wrap Film Series 1080. Excellent lifting resistance.
Use it right out of the box, no need to print or apply an overlaminate.
3M™ 2080 Wrap Film Series is more conformable than the previous 3M Wrap Film Series 1080,
enabling easier installation with less heat.
For best results with Series 2080, do not over-stretch material when conforming around
3M does not recommend the use of a torch during installs with Series 2080.
Heat guns are farless likely to haze or damage the material’s surface or Satin level.
If hazing occurs, the aid of a heat gun will bring the film back to its original level.
3M 2080 can be installed utilizing the same standard installation techniques as Series 1080 and 1380.
3M recommends the use of a slip solution for best results during installation. Some examples of common slip solutions are:
o 3M Paint-Protection Film Installation Gel
o Mixture of mild detergent & water
• Always post-heat wrap thoroughly after installation to prevent the material from lifting over time.
Roll width: 152cm
Roll length: 25m
Unit: 1 I/m
Minimum order quantity: 1 I/m at 152cm
Temperature resistance adhered to aluminium: -60°C to +107°C
Minimum application temperature: +16°C
Maximum service life by specialist application and proper care and usage:
Black/White: vertical 6 years, horizontal 3 years
Carbon and Brushed: vertical 6 years, horizontal 3 years
Colours: vertical 5 years, horizontal 2 years