Orajet 3675 Window Graphics Film
The Window graphics film Orajet 3675 is a perforated special white glossy PVC film with a black backing, fore use on smooth transparent substrates and glass.
After printing on the film surface, the picture becomes visible as the perforated black backing allows the viewer to see through from the other side. The ration of the printable area to the total surface is 50%. The small hole diameter of 1,5mm enables relatively special fine print.
This Window graphics film Orajet 3675 One way Vision film is used for outdoor applications ,shop windows, vehicle window panes, not laminated or laminated with ORAGUARD 297 GF.
Recommended laminates: Oraguard 297 GF
Printing method: Inkjet printing with solvent-based inks
Adhesive: Solvent polyacrylate, permanent, transparent
Thickness: 140 microns
Roll width: 152cm
Roll Length: 50m
Unit: 1 I/m
Minimum order: 1 meter at 152cm
Temperature resistance glued on aluminium: -40°C to + 80°C
Minimum application temperature: + 10°C
Maximum service life by specialist application:
Vertical 3 years (not printed).
Note: After printing, the perforated vinyl should be protected after printing . To be used only in dry application.
|Prijs is per
||One Way Vision Vinyl
|Prijs per meter